Free Sleepout & Cabin Planner
Plan a sleepout, cabin or garden room free online. Set the size, roof and finishes, drag the doors and windows where you want them, see it in plan, elevation and 3D, and get a timber and materials take-off with a cost estimate you control. If you are building in New Zealand it also checks your design against the Schedule 1 building consent exemption as you go. Works anywhere in the world, and on your phone.
How it works
- Pick a starting size — a small sleepout, a single room, a sleepout with a porch or a large cabin. Or type in your own length and width.
- Set the shape — wall height, how far the floor sits above the ground, roof shape (skillion, gable, hip or flat), pitch and eave overhang. The ridge height updates as you go.
- Choose your finishes — ten claddings in ten colours, five roofing materials in eight colours, joinery colours, interior lining and wall colour, and thirteen floor coverings from oak boards to polished concrete.
- Place the doors and windows — add as many as you like, put each one on any wall, and drag it along that wall on the plan or the elevation. They cannot be pushed into each other or round a corner, so nothing ever overlaps.
- See it drawn — a plan view showing the floor covering and joist run, an elevation of any wall showing the cladding, roof and joinery in the colours you picked, and a 3D view you can spin with your finger or the mouse.
- Get the materials — piles, bearers, joists, studs, plates, nogs and rafters with counts and lengths, plus cladding, roofing, lining and insulation areas.
- Work out the cost — set your own rates, then type in real quoted figures against any line as they come in. The total tracks both.
- Check the consent rules — for a New Zealand build, every Schedule 1 condition is tested live.
- Share it — send the link by WhatsApp, Facebook or email. It opens your exact design.
- Download — the drawing as a picture, or the full materials list as a text file to hand to your merchant.
Your plan saves on your device as you go, so you can come back to it later. There is a full screen button for more room on a phone or tablet.
Building outside New Zealand
This planner can be used in any country. The sizes, framing, materials, quantities and costings all work anywhere — only the consent rules are local. Set the country on the Rules tab to “Somewhere else” and the New Zealand verdict is removed. You will just need to check your own country’s building codes with your local building authority before you start. An exemption in one country is a breach in another.
The New Zealand consent check
Under Schedule 1 of the Building Act 2004 a single-storey detached building can be built without a building consent if it meets every condition. The planner tests your design against them as you change it: floor area, height above floor level, how far the floor sits above the ground, distance to the nearest boundary or dwelling, whether the construction counts as lightweight, and whether the building has plumbing or cooking facilities.
Three things catch people out. Adding a sink, toilet or cooktop voids the exemption for the whole build. Heavy cladding such as brick or stone takes you outside the lightweight route, so the work then has to be carried out or supervised by a Licensed Building Practitioner. And building closer than a metre to a boundary or another dwelling needs a fire-rated wall on that side.
Exempt from consent is not exempt from the Building Code. The work still has to comply, and under section 14B of the Building Act it is the owner who is responsible for deciding whether an exemption applies — not the council, and not this page. MBIE publishes a free step-by-step guide to constructing a sleepout that does not require building consent; check the current wording at building.govt.nz before you start. Rules change.
About the costs
Every cost in this planner is an estimate, not a quote. The figures come from rates you set yourself on the Build tab. The defaults are rough New Zealand numbers and they will be wrong for your job, your region and this year, so put your own rates in before you take any notice of the total.
As real quotes come in, go to the Costs tab and type the actual figure against any line — framing, cladding, roofing, joinery, whatever you have priced. Those lines then use your real numbers and everything else keeps using the estimate, so a part-priced job still adds up. The summary shows both totals side by side.
Quantities are take-offs from the sizes you enter. They make no allowance for waste, bracing, fixings, or the ground conditions on your site. Add your own waste factor and treat the result as a starting point for a conversation with a merchant and a builder, not as a price.
Wiesner Enterprises NZ and its owner accept no responsibility for any figure, quantity, drawing or consent assessment this tool produces, or for any decision made on it. Use it at your own discretion. It is not a substitute for a designer, an engineer, a Licensed Building Practitioner, a quantity surveyor or your council. Confirm everything with the right people before you spend money or start work.
More free tools
Design tools and calculators for the trades, all free to use.