Free Stair Calculator

Free Stair Calculator

Give it one measurement — floor to floor — and it works out equal risers, the going, the pitch, the stringer and the floor opening you need for headroom, then checks the lot against the four stairway types in the New Zealand Building Code. Free, no sign-up, works on your phone.

Start with the one measurement that matters

Everything on a stair comes off the floor-to-floor height, measured finished surface to finished surface. If the upper floor covering is not down yet, add the thickness you will end up with, or your top step will be out by exactly that much.

From there the calculator finds the fewest equal risers that stay inside the limit for your stair type, and shows you the option either side of it so you can trade a shallower step against a longer run. Every riser in a flight has to be the same — an odd one is what trips people, and it is the most common fault found on a finished stair.

There is always one more riser than there are treads, because the top riser lands on the floor above rather than on a tread.

The D1/AS1 limits

Acceptable Solution D1/AS1 classifies a stairway by how it is used, not by what kind of building it is in. A public stair in an office and the main stair in a house share the same row of the table.

StairwayMax pitchMax riserMin tread
Service or minor private47°220 mm220 mm
Secondary private41°200 mm250 mm
Common, or main private37°190 mm280 mm
Accessible32°180 mm310 mm

The main stair in a house is main private, and so is every outside private stair — which surprises people building a deck stair. All three limits have to be met at once. D1/AS1 sets no minimum riser.

About 2R + G

There is no 2R + G rule in the New Zealand Building Code. Plenty of stair calculators treat the 550–700 mm band as if it were the test, and it is not. It is an old rule of thumb about what feels comfortable to walk, and it is worth knowing it can pass a stair that fails outright: a 210 mm riser with a 250 mm going gives 670 mm, comfortably inside the band, and that riser is over the limit for every stairway type except service or minor private.

This calculator shows you the 2R + G figure because it is genuinely useful for comfort. It just does not let it decide whether your stair complies. The pass or fail here is the three D1/AS1 limits and nothing else.

Headroom and the floor opening

D1/AS1 Table 1 wants 2000 mm of clearance over a stairway, measured straight up from the pitch line, and 2100 mm on a pedestrian access route. That is what sets the length of the hole in the floor above, and it is the thing most often got wrong on a first attempt — the stair fits the plan beautifully and then someone cracks their head on the trimmer.

The calculator works the opening back from your pitch, assuming a 400 mm floor build-up above. Measure your own joist depth and ceiling and put that in if it differs.

What it does not cover

Riser, going and pitch are three requirements out of many. Handrails, barriers and their heights, slip resistance, open risers, winders and spiral stairs, the rise allowed between landings, and the structure of the stair itself are all separate and all still apply.

Building outside New Zealand

This calculator can be used in any country. The riser, going, pitch, stringer and setting-out maths is plain geometry and works anywhere. Only the limits on the Rules tab are local — check your own country’s building codes with your local building authority before you start.

Wiesner Enterprises NZ and its owner accept no responsibility for any figure, quantity or drawing this tool produces, or for any decision made on it. Use it at your own discretion. It is a design aid, not a producer statement and not a substitute for a designer, an engineer, a Licensed Building Practitioner or your council. Confirm everything before you cut anything.

More free tools

Design tools and calculators for the trades, all free to use.

Roof Pitch Calculator

Degrees, ratio, rafters, cuts and roof area

Open the Roof Pitch Calculator

Sleepout and Cabin Planner

Size, materials, costs and the consent check

Open the Sleepout Planner

House Planner

Floor plans, elevations, 3D and costings

Open the House Planner

Site Planner

Boundaries, buildings and site coverage

Open the Site Planner

Trade calculators

Concrete, tiling, painting, and brick and block

See the calculators
Know a tradie who would use this? Share this pageFacebookWhatsAppLinkedInXEmail

Link to us

Find our free tools and guides useful? Add one of these badges to your website. Tap a badge to get the code, then paste it into your site.